How to Deal with Battery Intake of Electric Vehicle

In this rainy season, if riding an electric bicycle, we must pay attention to the dashboard, controller, battery and motor are the four major components that need rain protection. From a safety point of view, the other three components need more water-proof than the instrument. In case of heavy rain, try not to ride on the road, easily blister the bicycle, and do not Park in the open air, because the batteries of the electric bicycle are most afraid of water intake, slight. Rainwater can only be ventilated and dried, if it is serious, it can only be sent for overhaul. In addition, the motor and controller are the most vulnerable to the water intake of electric vehicles. When riding, special attention should be paid to the depth of water accumulation, so that the normal driving can be achieved without more than half of the electric wheels.

Electric bicycle wading in water, the water resistance is very large, easy to cause out of control balance, in case of water cap open, it will be very dangerous.

2. Battery immersed in water will directly lead to short circuit of positive and negative poles, slightly damage the battery, and seriously lead to battery burning or even explosion, so the battery must be dried and recharged.

3. Although the motor controller has waterproof design, its waterproofness is not particularly good. It may cause short circuit, burnout or motor reversal because of the water inflow of the controller. Electric motors will also be short-circuited if they enter water. If the electric car is soaked in water, the controller can be unloaded and dried, and it can be dried and installed with a hairdryer.

Warm Tip: Do not travel by bicycle in rainy days, if you must travel in rainy days, you must choose a safe parking area to prevent damage to important parts.

The page contains the contents of the machine translation.