22 Years' Battery Customization

Dell No Battery Is Detected: Laptop, Working, and Communication

Jul 26, 2021   Pageview:823

When you pull out your Dell laptop and push the power button at your neighborhood coffee shop, you expect the screen to light up and show a login screen. But what if there's no action because the battery is dead? Fortunately, you may have a cord on you. However, when you connect the cord, the battery is either not detected or is plugged in but not charging. Is there a way to avoid buying a new battery?

3.2V 20Ah Low Temperature Square LiFePO4 Battery Cell
3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature:-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate:3C

The battery is one of the essential components of a laptop since it allows you to take your technology with you and work from anyplace. Don't be alarmed if you get a "no battery is detected" error. There are a lot of possible fixes to this laptop problem, and receiving one of these error messages doesn't always imply you'll need to buy a new laptop or a replacement battery.

Laptop battery not detected but still works.

Many Dell batteries have a problem with the laptop failing to recognize a microchip inside the battery assembly. This microchip is the one that says, "Hello there! I'm a genuine Dell power supply. It is now safe to charge me." If the laptop doesn't recognize this microprocessor, the battery may charge slowly, not charge at all, or refuse to switch on even when fully charged.

If the sensor isn't functioning correctly, a fully charged and functional battery may fail to turn on the laptop or flash error lights. If this is the case, you don't need to go out and get a new battery if the sensor is just not recognizing the battery correctly.

The issue can arise for a variety of causes, including the battery not being properly inserted in the laptop at one point, a power surge, or even being removed from the laptop while charging. While the actual cause isn't always clear, it can usually be resolved.

You may only need to reset the system's ability to recognize the battery to resolve this issue. Unfortunately, many Dell technical support employees are either unaware of this method or feel compelled to offer new batteries. Of fact, a technician thousands of miles away may struggle to distinguish between a battery that has genuinely failed and one that is simply not being appropriately recognized.

When your laptop’s battery doesn’t get detected but still works, you should run a scan of your battery. Select Batteries in Device Manager, then right-click your laptop's battery and select Properties. If you notice text indicating that your device is operating normally, your battery is fine, and the no battery detected bug is most likely due to something else. If this notice does not appear, your battery may be damaged, and you will need to replace it.

How to make a non-dell battery work.

If you haven't already, get a replacement battery for your laptop. Dell batteries are available for purchase directly from the company. However, they are pricey. You can also purchase a battery from a third-party source, such as an auction website. Be warned that the Dell brand name is not always included on auction websites' batteries. Although these batteries should function as well as genuine Dell batteries, Dell will not be responsible for any problems that develop as a result of their use.

Low Temperature High Energy Density Rugged Laptop Polymer Battery 11.1V 7800mAh
Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

Turn off the laptop. Close the laptop's screen and flip it over, so the bottom side is facing up. 

The battery pack is located on the bottom of the laptop. A little button next to a set of light-emitting diodes is seen on many Dell batteries. When the button is pressed, the LEDs show the battery's current charge level. If you can't find the battery this way, look for the largest plastic component with seams around it that indicates it can be removed. A release tab or switch is located near the battery.

To disengage the battery lock, press and hold the release tab or switch. 

Slide the battery out of the laptop's body, or use the plastic lip on the side of the battery to lift it out if all four sides of the battery are hidden within the laptop. 

Replace the battery by pushing it into the compartment until it snaps into place.

The system cannot communicate with your battery dell.

Dell's technical support workers may inform you that the problem is a 'temporary battery failure' with no additional explanation and that you will need to replace your system's battery. You believe Dell's customer service staff know what they're talking about, so you give in and buy a new battery. However, you might buy a new battery and discover that it has the same symptoms as the "failed" battery. What makes you think a fresh new battery won't work? The temporary failure merely means that the laptop can't interact with the battery for a short period of time.

The issue can arise for a variety of causes, including the battery not being properly inserted in the laptop at one point, a power surge, or even being removed from the laptop while charging. While the actual cause isn't always clear, it can usually be resolved. 

It's also conceivable that you don't have an original battery if the laptop won't identify it. It's possible that the battery is a knockoff or an aftermarket replacement. Many aftermarket batteries, which are often of lower quality, aren't designed to the same high specifications that laptop manufacturers require.

Remove the batteries and power cycle your lap. If your laptop thinks it doesn't have a battery, shut it down completely, unplug all cables and power sources, physically remove the battery, press the power button for at least 15 seconds, replace the battery, rejoin the charging wire, and then turn it on as usual. If a starting prompt appears, choose Start Windows Normally.

Conclusion 

When your laptop is not connected to a power source, the battery is what keeps it alive. Take care of your laptop battery. When you face any troubleshooting issues, do not forget to re-read this article. 

*
*
*

Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done