LiPo Battery Low Voltage Warning – Reasons

Sep 11, 2019   Pageview:21

LiPo batteries are one of the most often batteries that you would found in drones, or any other electrical devices. Although it has a shorter life span compared to other batteries, it also offers much higher capacity.


A single LiPo cell would normally have 3.7 V. The cells that you brought sometimes consist of more than 1 cell.


There is a lot of care that you need to provide for your LiPo battery. LiPo batteries tend to be very vulnerable when it was charging, or even drain it too much. You should only use a LiPo battery charger to charge your battery. It is because the charger that is specified for LiPo batteries is able to keep the inflow of current constant to the battery. After it reached its peak, it will maintain the voltage and reduces the current.


solar-835894_640.jpg


The chargers are also able to balance the voltages that go into each of the batteries. It is important because you have to ensure that all of your batteries inside your battery pack is charged equally.


In order to keep the longevity of the battery, it is better for you to avoid parallel charging. When you do parallel charging, your battery charger will not be able to see all of the battery and maintain the flow of the electricity. It will only see your battery as one.


The only scenario when parallel charging is allowed is when all the batteries are manufactured by the same company, with the same production batch. As we all know, this is hardly the case. The best way to charge your LiPo battery is by having a multi-port charger.


Advantages of LiPo Battery Low Voltage Warning

As we all know, charging is very essential to the longevity of your LiPo battery. This is when the LiPo battery low voltage battery comes in handy.


First, the LiPo batty low voltage warning will be able to notify you when your battery is running low. Even during usage. This means that it will be able to help you detect the battery voltage, and avoid draining the battery altogether. You can even set up your own battery limit to the device.


Not only that, batter low voltage warning can also be set to protect the battery from overcharging. Overcharging can result in permanent damage to the battery chemical. Not only that, but there is also a huge chance that your LiPo battery can catch fire if you do.


Overcharged LiPo battery tends to puff up. If you keep on charging it, then there is a huge chance that it will catch on fire. This is the main reason why LiPo batteries should not be left unattended while charging.


One thing that you have to know as a LiPo battery user when you have used your batteries, even when all of the cells are charged the same, there might be some difference in voltage after usage. By using the device, you will be able to know what is the exact voltage in each of your battery cells. This can be taken care of buy using LiPo Battery charger that has the stability function. The charger would then balance the charging of this automatically.


1564479617567056287.jpg


How to deal with LiPo Battery Low Voltage Warning

Using a LiPo battery low voltage warning is easy. It is only a warning to notify you when the battery has gone low, and that you have to recharge them.


It also has a very easy installation process. You first need to find the ground wire on the balance connector. The wire is going to be the one that is the farthest away from the red wire. The next thing is you only need to match the ground wire up to the minus symbol on the back of the tester or monitor.


Once your battery is connected, the monitor will produce a beep. It will then show you a cycle of four measurements; All reflects the voltage of the entire battery, Number 1 will reflect the voltage on cell number 1, number 2 will reflect the cell voltage of cell number 2, and number 3 will reflect the cell voltage of cell number 3.


If you are going to use the LiPo battery low voltage warning to notify you when the battery has reached a certain level, then all you have to do is to press the middle button of the buzzer. Once you have done it, then the buzzer will reflect numbers in which you can set your buzzer. Whichever number that you have picked will be the minimum standard voltage that your LiPo battery contains before it started sounded an alarm.


You can use this buzzer and attach it with the LiPo battery even when you are using the batteries. However, it is not advisable to store the battery with the battery tester or monitor as it could drain your battery.


What kinds of tool you can use for LiPo Battery Low Voltage Warning

To use the LiPo battery buzzer, you do not need to have any other tool aside your LiPo battery low voltage monitor. These type of monitor comes in various price ranges and various brands.


The most important to look for is the ring on the top of the LiPo Battery buzzer. The ring will allow you to set the minimum voltage easily compared to the ones without a ring. The next thing that you have to do is to ensure that you plug the right part of your battery. If you do not, then the LiPo battery monitor will not work, or it will not be able to detect your battery.


The cable is usually found when you bought your LiPo battery low voltage monitor. Each alarm also has its own alarms that will let you know when your battery has hit the minimum standard that you have set.


Leave a message

Contact Us
Your name(optional)

* Please enter your name
* Email address

Email is required. This email is not valid
* How can we help you?

Massage is required.
Contact Us

We’ll get back to you soon

Done